This picture is looking at the passengers side of the radiator area from underneath.
Here is the area you will need to "clearance".  I use the bumper bolt (in the center) and a small piece strapping (came with the kit) to mount the left side of the cooler.

To mount the right side of the cooler I drilled a hole in the ram air scoop.  You can see it here...  You will need to cut the plastic shielding that normally hangs down in this area.

I also placed a sheet metal screw provided in the kit through the bottom hole into the plastic, for extra support.  On other cars I have also cutout the area directly behind cooler to provide more air flow.

I don't have any pictures.. but right underneath the hose on the left is the small piece of strapping and the bumper bolt.